Kreg Accessories

Whether you are building production cabinets or just a single set for your home or shop, this drawer slide mounting tool will greatly simplify the process of positioning your slides accurately to assure smooth gliding drawer movement. This tool uses the intersection of the cabinet stile and rail in face frame cabinets & the cabinet side in frameless cabinets as a reference point from which to position a slide perfectly parallel to the drawer opening. Simply place a metallic draweeer slide into position on the base of the tool, (magnets hold the slide in place) align the tool where the stile and rail meet as shown at left and drive the screws. Perfect alignment every time!

For both face frame and faceless cabinets, aligning the drawer box to full-extension slides is simple with our Drawer Mounting Brackets.
Simply clamp a bracket under each slide, set the drawer box into the drawer opening so it balances on the brackets, then pull the slide to the front of the box and drive your screws. The 12" brackets work with most common drawer sizes and the 1/8" tabs on the front of bracket are designed to fit under mounted full-extension slides for perfect placement every time.
Made of rugged, shock resistant plastic for years of service, these brackets are a great addition to your workshop and toolbox.

Drawers, Shelving, and T-Joints made easy!

• Self-Squaring Design makes it easy to square and secure individual joints,every time!
• Quick-Adjust Handle lets you make fast and easy adjustments for varying stock thicknesses up to 1-1/4 in
• Innovative Swivel Head and quick release lever improve ease-of-use and efficiency.
• Large Clamping Surface protects soft woods against workpiece imprint.
• Durable Heat Treated Steel construction features nickel plating for additional longevity.

The range of Face Clamps help to ensure a perfectly flush joint every time. Without clamping, the joint can misalign if the screw follows the grain of the wood. To use, place the large pad of the clamp directly over the center of the joint line on the face side of the workpieces (opposite the pocket holes), clamp with moderate pressure and drive a screw.
Size 2" Reach.

The range of Face Clamps help to ensure a perfectly flush joint every time. Without clamping, the joint can misalign if the screw follows the grain of the wood. To use, place the large pad of the clamp directly over the center of the joint line on the face side of the workpieces (opposite the pocket holes), clamp with moderate pressure and drive a screw.
Size 3¼" Reach.

The range of Face Clamps help to ensure a perfectly flush joint every time. Without clamping, the joint can misalign if the screw follows the grain of the wood. To use, place the large pad of the clamp directly over the center of the joint line on the face side of the workpieces (opposite the pocket holes), clamp with moderate pressure and drive a screw.
Size 6" Reach

The range of Face Clamps help to ensure a perfectly flush joint every time. Without clamping, the joint can misalign if the screw follows the grain of the wood. To use, place the large pad of the clamp directly over the center of the joint line on the face side of the workpieces (opposite the pocket holes), clamp with moderate pressure and drive a screw.
Size 10" Reach.

The range of Face Clamps help to ensure a perfectly flush joint every time. Without clamping, the joint can misalign if the screw follows the grain of the wood. To use, place the large pad of the clamp directly over the center of the joint line on the face side of the workpieces (opposite the pocket holes), clamp with moderate pressure and drive a screw.
Size 10" Reach.

The Kreg Right Angle Clamp helps to align workpieces in 90º registration. The clamp is designed with a steel dowel on one arm that fits down into the pocket hole and anchors the workpiece to be joined. The opposite arm is fitted with a 180º swivelling pad that automatically adjusts to your material dimensions. Finish the joint by driving a screw into the adjacent pocket hole. The illustration shows joining the carcass of a abinet to the face frame. Also great for assembling all types of box joints.

Add a helping hand to your workbench with our Bench Klamp Systems. Perfect for assembling pocket hole joints, or as a general hold-down when routing, sanding, and more. Our most popular Bench Klamp consists of a 3" x 4" x 1/4" thick hard-anodized aluminum insert plate and clamp. Insert plates are also sold separately that can be routed into your workbench to add multiple clamping locations. Our second version, the Large Bench Klamp, consists of a 10" x 10" x 1/4" thick steel plate that can also be used as a stand-alone clamping fixture. Both systems feature a keyed slot which allows for instant removal of the clamp from the plate.

• 10" x 10" solid steel plate.
• 1/4" thick and can be routed into work surface.
• Keyed slot allows for instant removal of the clamp from the plate.
• Clamp rotates 360 degrees within the plate.

Add a helping hand to your workbench with our Large Bench Klamp System. This 10" x 10" x 1/4" thick sturdy steel plate is extremely rugged to handle your toughest clamping applications. Perfect for pocket hole joinery, or as a general hold-down clamp while routing, sanding, etc.

This Bit Works With K2000, K2, Rocket & Mini

Includes Hex Key & Grub Screw.