Torque Wrenches - 3/8in Drive

Norbar Torque Wrench with bright chrome body, plastic adjusting knob and suspension ring.

With reversible ratchet head.

Range. 3 -15lbft. 4 -20NM.
3/8in Square Drive
Length: 220mm - 8.5/8in

Required torque loads are set by turning the sleeve until the required setting is opposite the mark.

All Britool torque wrenches indicate with touch, sound and sight when the required torque is reached.

Torque Range.

2.5 - 11 Nm.
2- 8 lb/ft.
3/8in. Square Drive.
Length. 12.1/2in.

3/8in Square Drive Torque Wrench with flip reverse ratchet action, and Nm case scales with FT/LB or KG reference scales. Manufactured to conform to BS 6703/88.

Covers 5-25nm (4-18ft/lb) with in built angular gauge, also suitable for 1/4in square drive sockets if used in conjunction with 3/8 female/ 1/4 male adaptor (380035).

The unique angular gauge, for use after tightening stretch bolts, allows bolts to be tightened over and above a pre-set torque rating by so many degrees, e.g. 45º both the torque and angular gauge can be set with the one tool.

Supplied in robust oil resistant case.

3/8in Square Drive Torque Wrench with flip reverse ratchet action, and Nm case scales with FT/LB or KG reference scales. Manufactured to conform to BS 6703/88.

The unique angular gauge, for use after tightening stretch bolts, allows bolts to be tightened over and above a pre-set torque rating by so many degrees, e.g. 45º both the torque and angular gauge can be set with the one tool.

Supplied in robust oil resistant case.

Torque wrench according to DIN3122. With ratchet the torque wrench can be used for both tightening and final checking of the torque. Reversible with lever but only for right hand action for torque checking. Equipped with angular gauge for after tightening.
Graduated in Nm and lbs/ft.
Lockable setting.
Accuracy +/- 4%.
Satin finish, rubber handle.
Degree scale for after tightening of cylinder heads.

Nm range 5, 25.
Lbs/ft range 4-18.
Length 277mm.

Auto Torque represent a selection of competitively priced fine precision torque wrenches manufactured in Britain. A forged ratchet with a push through 3/8in or 1/2in square drive for right of left hand threads.

The low friction torque mechanism is fully enclosed giving protection against ingress of dirt.

Calibration is in Pounds Force Feet and Newton Metres. An AUDIBLE CLICK and an IMPULSE through the wrench indicates pre-set has been achieved. Reset is automatic when hand pressure is relaxed.

Each torque wrench is guaranteed and conforms to BS.6703 and ISO 6789 standards.

When used in accordance with the manufacturers instructions the Williams Superslim torque wrench will give many years of highly accurate and reliable use.

The AutoTorque model has a full size plastic handle which gives the operator a hand grip and is also used to set the required torque loading against a calibration scale of lbf.ft and Nm on the tubular steel body. Each AutoTorque is individually tested before leaving the factory.

Reversible ratchet thread
Black powder coating

Square Drive - 3/8in
lbt.ft 10 - 50
Nm 15 - 70
Overall Length 420mm / 16.1/2in
Weight 1021Gramms

Slim Torque represent a selection of competitively priced fine precision torque wrenches manufactured in Britain. A forged ratchet with a push through 3/8in or 1/2in square drive for right of left hand threads.

The low friction torque mechanism is fully enclosed giving protection against ingress of dirt.

Calibration is in Pounds Force Feet and Newton Metres. An AUDIBLE CLICK and an IMPULSE through the wrench indicates pre-set has been achieved. Reset is automatic when hand pressure is relaxed.

Each torque wrench is guaranteed and conforms to BS.6703 and ISO 6789 standards.

When used in accordance with the manufacturers instructions the Williams Superslim torque wrench will give many years of highly accurate and reliable use.

The Slim Torque has two windows that display the calibrated scale one showing lbf.ft.,the other Nm. Finger tip adjustment of the end cap aligns the calibrated scale with the marker line in each window giving an accurate indication of torque loading. Each Slim Torque is individually tested before leaving the factory.

Reversible ratchet thread
Silver powder coating

Square Drive - 3/8in
lbt.ft 10 - 50
Nm 15 - 70
Overall Length 375mm / 14.3/4in
Weight 900 Gramms