Torque Wrenches - 1/2in Drive

Required torque loads are set by turning the sleeve until the required setting is opposite the mark.

All Britool torque wrenches indicate with touch, sound and sight when the required torque is reached.

Torque Range.

12 - 68Nm.
10 - 50 Lb/Ft.
1/2in. Square Drive.
18.3/4in Long.

Required torque loads are set by turning the sleeve until the required setting is opposite the mark.

All Britool torque wrenches indicate with touch, sound and sight when the required torque is reached.

Torque Range.

25 -135Nm.
20- 100 Lb/ft.
Square Drive 1/2in.
Length. 21.1/2in

Required torque loads are set by turning the sleeve until the required setting is opposite the mark.

All Britool torque wrenches indicate with touch, sound and sight when the required torque is reached.

Torque Range.

50 -225Nm.
40 -160 Lb/Ft.
1/2in. Square Drive
Length. 23.1/2in.

Required torque loads are set by turning the sleeve until the required setting is opposite the mark.

All Britool torque wrenches indicate with touch, sound and sight when the required torque is reached.

Torque Range.

70 -330Nm.
50 -250 Lb/Ft.
1/2in Square Drive.
32.1/2in Long.

1/2 in Square Torque Wrench with flip reverse ratchet action suitable for commercial and industrial applications , with in built angular gauge.Manufactured to conform to BS6703/88.

Features:
NM Base Scales with FT/LB or KG reference scales
Quality Satin Finish
Rubber Protective Collar
Locking Knob
Unique Angular Gauge, for use after tightening stretch bolts, which allows bolts to be tightened over and above a preset torque rating by so many degrees, e.g. both the torque and angular gauge can be set with the one tool.from 40-210Nm

1/2 in Square Torque Wrench with flip reverse ratchet action suitable for commercial and industrial applications , with in built angular gauge.Manufactured to conform to BS6703/88.

Features:
NM Base Scales with FT/LB or KG reference scales
Quality Satin Finish
Rubber Protective Collar
Locking Knob
Unique Angular Gauge, for use after tightening stretch bolts, which allows bolts to be tightened over and above a preset torque rating by so many degrees, e.g. both the torque and angular gauge can be set with the one tool.from 40-210Nm

1/2 in Square Torque Wrench with flip reverse ratchet action suitable for commercial and industrial applications , with in built angular gauge.Manufactured to conform to BS6703/88.

Features:
NM Base Scales with FT/LB or KG reference scales
Quality Satin Finish
Rubber Protective Collar
Locking Knob
Unique Angular Gauge, for use after tightening stretch bolts, which allows bolts to be tightened over and above a preset torque rating by so many degrees, e.g. both the torque and angular gauge can be set with the one tool.from 50-250Nm

Auto Torque represent a selection of competitively priced fine precision torque wrenches manufactured in Britain. A forged ratchet with a push through 3/8in or 1/2in square drive for right of left hand threads.

The low friction torque mechanism is fully enclosed giving protection against ingress of dirt.

Calibration is in Pounds Force Feet and Newton Metres. An AUDIBLE CLICK and an IMPULSE through the wrench indicates pre-set has been achieved. Reset is automatic when hand pressure is relaxed.

Each torque wrench is guaranteed and conforms to BS.6703 and ISO 6789 standards.

When used in accordance with the manufacturers instructions the Williams Superslim torque wrench will give many years of highly accurate and reliable use.

The AutoTorque model has a full size plastic handle which gives the operator a hand grip and is also used to set the required torque loading against a calibration scale of lbf.ft and Nm on the tubular steel body. Each AutoTorque is individually tested before leaving the factory.

Reversible ratchet thread
Black powder coating

Square Drive - 1/2in
lbt.ft 10 - 50
Nm 15 - 70
Overall Length 420mm / 16.1/2in
Weight 1021Gramms

Auto Torque represent a selection of competitively priced fine precision torque wrenches manufactured in Britain. A forged ratchet with a push through 3/8in or 1/2in square drive for right of left hand threads.

The low friction torque mechanism is fully enclosed giving protection against ingress of dirt.

Calibration is in Pounds Force Feet and Newton Metres. An AUDIBLE CLICK and an IMPULSE through the wrench indicates pre-set has been achieved. Reset is automatic when hand pressure is relaxed.

Each torque wrench is guaranteed and conforms to BS.6703 and ISO 6789 standards.

When used in accordance with the manufacturers instructions the Williams Superslim torque wrench will give many years of highly accurate and reliable use.

The AutoTorque model has a full size plastic handle which gives the operator a hand grip and is also used to set the required torque loading against a calibration scale of lbf.ft and Nm on the tubular steel body. Each AutoTorque is individually tested before leaving the factory.

Reversible ratchet thread
Black powder coating

Square Drive - 1/2in
lbt.ft 20 - 100
Nm 20 - 140
Overall Length 521mm / 20.1/2in
Weight 1219 Gramms

Auto Torque represent a selection of competitively priced fine precision torque wrenches manufactured in Britain. A forged ratchet with a push through 3/8in or 1/2in square drive for right of left hand threads.

The low friction torque mechanism is fully enclosed giving protection against ingress of dirt.

Calibration is in Pounds Force Feet and Newton Metres. An AUDIBLE CLICK and an IMPULSE through the wrench indicates pre-set has been achieved. Reset is automatic when hand pressure is relaxed.

Each torque wrench is guaranteed and conforms to BS.6703 and ISO 6789 standards.

When used in accordance with the manufacturers instructions the Williams Superslim torque wrench will give many years of highly accurate and reliable use.

The AutoTorque model has a full size plastic handle which gives the operator a hand grip and is also used to set the required torque loading against a calibration scale of lbf.ft and Nm on the tubular steel body. Each AutoTorque is individually tested before leaving the factory.

Reversible ratchet thread
Black powder coating

Square Drive - 1/2in
lbt.ft 40 - 200
Nm 60 - 280
Overall Length 546mm / 21.1/2in
Weight 1375Gramms

Slim Torque represent a selection of competitively priced fine precision torque wrenches manufactured in Britain. A forged ratchet with a push through 3/8in or 1/2in square drive for right of left hand threads.

The low friction torque mechanism is fully enclosed giving protection against ingress of dirt.

Calibration is in Pounds Force Feet and Newton Metres. An AUDIBLE CLICK and an IMPULSE through the wrench indicates pre-set has been achieved. Reset is automatic when hand pressure is relaxed.

Each torque wrench is guaranteed and conforms to BS.6703 and ISO 6789 standards.

When used in accordance with the manufacturers instructions the Williams Superslim torque wrench will give many years of highly accurate and reliable use.

The Slim Torque has two windows that display the calibrated scale one showing lbf.ft.,the other Nm. Finger tip adjustment of the end cap aligns the calibrated scale with the marker line in each window giving an accurate indication of torque loading. Each Slim Torque is individually tested before leaving the factory.

Reversible ratchet thread
Silver powder coating

Square Drive - 1/2in
lbt.ft 10 - 50
Nm 15 - 70
Overall Length 375mm / 14.3/4in
Weight 900 Gramms

Slim Torque represent a selection of competitively priced fine precision torque wrenches manufactured in Britain. A forged ratchet with a push through 3/8in or 1/2in square drive for right of left hand threads.

The low friction torque mechanism is fully enclosed giving protection against ingress of dirt.

Calibration is in Pounds Force Feet and Newton Metres. An AUDIBLE CLICK and an IMPULSE through the wrench indicates pre-set has been achieved. Reset is automatic when hand pressure is relaxed.

Each torque wrench is guaranteed and conforms to BS.6703 and ISO 6789 standards.

When used in accordance with the manufacturers instructions the Williams Superslim torque wrench will give many years of highly accurate and reliable use.

The Slim Torque has two windows that display the calibrated scale one showing lbf.ft.,the other Nm. Finger tip adjustment of the end cap aligns the calibrated scale with the marker line in each window giving an accurate indication of torque loading. Each Slim Torque is individually tested before leaving the factory.

Reversible ratchet thread
Silver powder coating

Square Drive - 1/2in
lbt.ft 20 - 100
Nm 20 - 140
Overall Length 470mm / 18.1/2in
Weight 1100 Gramms

Slim Torque represent a selection of competitively priced fine precision torque wrenches manufactured in Britain. A forged ratchet with a push through 3/8in or 1/2in square drive for right of left hand threads.

The low friction torque mechanism is fully enclosed giving protection against ingress of dirt.

Calibration is in Pounds Force Feet and Newton Metres. An AUDIBLE CLICK and an IMPULSE through the wrench indicates pre-set has been achieved. Reset is automatic when hand pressure is relaxed.

Each torque wrench is guaranteed and conforms to BS.6703 and ISO 6789 standards.

When used in accordance with the manufacturers instructions the Williams Superslim torque wrench will give many years of highly accurate and reliable use.

The Slim Torque has two windows that display the calibrated scale one showing lbf.ft.,the other Nm. Finger tip adjustment of the end cap aligns the calibrated scale with the marker line in each window giving an accurate indication of torque loading. Each Slim Torque is individually tested before leaving the factory.

Reversible ratchet thread
Silver powder coating

Square Drive - 1/2in
lbt.ft 40 - 200
Nm 60 - 280
Overall Length 502mm / 19.3/4in
Weight 1350 Gramms

ProTorque torque wrenches for the professional, manufactured in Britain to a high specification and finish.

The Pro Torque has forged ratchet heads of 3/8in or 1/2in square drive incorporating a 30 point ratchet mechanism and a push through square drive for right or left hand threads.

Each Pro Torque is SERIAL NUMBERED and issued with a CERTIFICATE OF CALIBRATION.

Calibration test carried out on NAMAS approved equipment to BS.6703 and I.S.O.6789 torque wrench standards.

The Pro Torque has a fully adjustable scale in lbf.ft.,Nm. and Kgf.m.housed in a polished chromium plated tubular steel body which fully encloses the low friction ball bearing torque
mechanism.
A steel indicator rod with calibrations in lbf.ft.,Nm. and Kgf.M., adjusted by a hanger / key for easy torque setting. Supplied with a certificate of calibration and operating
instructions in a transparent blister pack (DC) or a plastic pack (PX).

Square Drive 1/2in
lbt ft 10 - 50
Nm 15 - 70
Overall Length 420mm / 16.1/2in
Weight 1020 Gramms