Tool - Multisharp Sharpeners

This unique dual purpose drill and tool sharpener will not only accurately sharpen H.S.S and masonry bits, (including 2 and 4 edged bits and SDS Plus Bits), but also re-edges and re-sharpens scribers, bradawls, punches, cold chisels and TCT tile and laminate cutters.

Silicon Carbide replacement wheel to fit 2001 Multisharp.

WATER-COOLING is acknowledged by professionals to hone the finest edges. This compact system uses a controlled flow of water to eliminate over-heating of the blade edge and lose of temper in the steel. Simply fill the built-in reservoir with water, turn on the power drill and a continuous film of water covers the face of the grinding wheel.

WOOD CHISELS / PLANE BLADES
The system re-sharpens even badly damaged chisels / plane blades quickly, because it uses the relatively high power / torque of an electric drill. The clamp firmly holds the blade at the selected angle (25º to 40º) for a precision ground edge. The traditional leather strop removes any burr, for a razor sharp edge.

SMALL TOOLS
The Tool Rest gives a firm base for re-sharpening, re-pointing and re-edging a whole range of small tools including: cold chisels, bradawls, screwdrivers, centre-punches, scribers, wood carving / turning tools, gouges etc. Marked angles on the Rest indicates the tip angle.

Blade capacity 10-60 mm wide.

Sharpening angles 25º, 30º, 35º, 40º for primary & secondary bevels, plus rebate chisels

Grinding wheel High quality aluminium oxide (replaceable)

Construction Very strong glass-reinforced nylon

Power source Any electric drill

Replacement grinding wheel for the 3001 Wetstone Water Cooled Sharpener.

Aluminium Oxide replacement wheel to fit 2001 Multisharp.