Stabila 80A Top Line Box Levels

This spirit level can be used to check the horizontality of overhead surfaces by turning it and its horizontal vial upside down. In this so-called transfer position, you can then measure precisely from underneath.

Light metal rectangular profile with milled measuring surface for everyday use.

1 vertical vial and 1 horizontal vial.

Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. For overhead measurements: 0.043° = 0.75 mm/m.

Stabila patent . Vials that are moulded in - No readjustment required.

Length 100cm / 40in

This spirit level can be used to check the horizontality of overhead surfaces by turning it and its horizontal vial upside down. In this so-called transfer position, you can then measure precisely from underneath.

Light metal rectangular profile with milled measuring surface for everyday use.

1 vertical vial and 1 horizontal vial.

Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. For overhead measurements: 0.043° = 0.75 mm/m.

Stabila patent . Vials that are moulded in - No readjustment required.

Length 120cm / 48in

This spirit level can be used to check the horizontality of overhead surfaces by turning it and its horizontal vial upside down. In this so-called transfer position, you can then measure precisely from underneath.

Light metal rectangular profile with milled measuring surface for everyday use.

1 vertical vial and 1 horizontal vial.

Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. For overhead measurements: 0.043° = 0.75 mm/m.

Stabila patent . Vials that are moulded in - No readjustment required.

Length 40cm / 16in

This spirit level can be used to check the horizontality of overhead surfaces by turning it and its horizontal vial upside down. In this so-called transfer position, you can then measure precisely from underneath.

Light metal rectangular profile with milled measuring surface for everyday use.

1 vertical vial and 1 horizontal vial.

Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. For overhead measurements: 0.043° = 0.75 mm/m.

Stabila patent . Vials that are moulded in - No readjustment required.

Length 60cm / 24in

This spirit level can be used to check the horizontality of overhead surfaces by turning it and its horizontal vial upside down. In this so-called transfer position, you can then measure precisely from underneath.

Light metal rectangular profile with milled measuring surface for everyday use.

1 vertical vial and 1 horizontal vial.

Measurement accuracy: in the normal position 0.029° = 0.5 mm/m. For overhead measurements: 0.043° = 0.75 mm/m.

Stabila patent . Vials that are moulded in - No readjustment required.

Length 80cm / 32in