Radiator Keys

Scottool Double Ended Radiator Key.
Features of this key include 10mm square on one for installation of 1/2in BI plugs 1/2in air vent plugs, whilst the other for installation of internal hex valves and internal lug type valves.
1/2in section.

High quality hexagon keys, zinc plated for corrosion resistance.

A must for installing or maintaining heating
systems.

The Scottool Radiator and Valve Key.
One end of this key is machined into 10mm square for installAtion of 1/2in BI plugs and 1/2in vent plugs.
The other being used for installation of internal hexagon valves.

Type 1

1/2in section.

High quality hexagon keys, zinc plated for corrosion resistance.

A must for installing or maintaining heating
systems.

Scottool Valve and Air Key.
Designed with two grooves in one end for installation of internal lug valves having the other end designed as an air vent key.

1/2in section.

High quality hexagon keys, zinc plated for corrosion resistance.

A must for installing or maintaining heating
systems.

Stepped radiator spanner and ratchet handle. For use on most radiator valves , nipples , plugs , tank connectors etc.

Both ends are tapered and therefore self restricting.
The three profiles make the tool universal,catering for 3/8in and 10mm square section radiator vent plugs and bleed screws.
Bayonet or internal lug type radiator valves allowing for variations in size, shape and position.
12mm to 14mm internal hexagon valves tapered allowing for variations in size.

Steel radiator spanner for 3/8in and 10mm square section radiator vent plugs and bleed screws.
Zinc plated finish with slightly offset handle.

Steel, zinc plated valve spanner and Air release key.
Slightly offset handle.

Size Double Ended 12mm

Three legged radiator valve key for 1/2in, 3/4in & 1in Radiator Valves.

A multi purpose four way key for gas, water and electric meter cupboards, air conditioning units, stop valves, mains consoles etc, central heating pump cocks, some radiator valves and drain off valves.

Used for venting excess air from radiators, these traditional T bar handled radiator keys are a handy item for storing in a toolbox or kitchen drawer.

Spanner to facilitate fitting and removal of standard and thermostatic radiator valves.

for control cabinets and shut-off systems in the supply of gas, water and electricity
for technical installations in buildings, e. g. air conditioning and ventilation systems, shut-off valves, mains switch-boards, etc.
short execution, total length 44 mm
square 6 + 8 mm
triangular 9 mm
two-way key bit Ø 9 mm
with bit insert: slot 1.0 x 7 mm and cross recess PH 2
with adapter for 1/4 Inch bits on securing chain
zinc die-casting
long execution, total length 76 mm
additional square 5 mm

for control cabinets and shut-off systems in the supply of gas, water and electricity
for technical installations in buildings, e. g. air conditioning and ventilation systems, shut-off valves, mains switch-boards, etc.
short execution, total length 44 mm
square 6 + 7 + 8mm
triangular 10mm
two-way key bit Ø 9 mm
with bit insert: slot 1.0 x 7 mm and cross recess PH 2
with adapter for 1/4 Inch bits on securing chain
zinc die-casting
long execution - conical square
additional square 5 mm

For bleeding the air from radiators especially after the summer period of non-use of the heating systems.

Supplied in the natural brass condition.