Laser Levels - Manual Rotation

Many jobs can be done more easily and quickly using the laser system.

Accurate marking of straight lines, vertical of horizontal reference planes, positioning of fixings etc is simply achieved.

This kit is complete with a 80LMX 16in/40cm level patented no tolerance roto base plate and penta prism.

Accuracy of the system is 0.014 or 0.25mm per metre.

Bright Beam.

(2 vials, 635nm wavelength beam).

Laser Class : II
Laser Wavelength : 635 nm
Horizontal Accuracy : +/- 0.25mm / Meter
Vertical vial Accuracy : +/-0.5mm / Meter
Range : 40 Meters

Rapid, accurate levelling with the Type LMR manual rotation laser.

Align the laser using the large, easy to turn adjustment screws on the casing and you can start any possible type of horizontal levelling operation, the three laser rotation speeds you can select enable you to adapt the type of laser projection to suit the application. The same also applies to the scan function, where you can choose from three possible settings to produce scanning lines of different lengths.

For vertical levelling, simply turn the unit 90° on the runners.
Integral wall mounting bracket, e.g. for suspended ceiling work.

omprising: Rotation laser Type LMR, receiver, laser goggles and target plate with rule, all in a strong plastic carrying case.

Laser class II
Output : 1 mW
Laser wavelength : 635 nm
Horizontal accuracy :± 0,3 mm/m
Receiver range* :80 Meters (*At 21°C, under optimum atmospheric conditions)
Battery life :approx. 40 hours

Short laser spirit level with point mode and strong magnet for rapid, accurate levelling on the base plate supplied. The economical alternative for horizontal levelling.

Point function: for transferring similar installation heights for window sills, tiles, cables and wall cladding with a range of 40metres.

For levelling floors, paths and staircases. For marking out sockets, wall vents and cables .

Laser Class : II
Output : <1 mW
Laser Wavelength: 650 nm
Hozizontal accuracy : +/- 0.5mm/m
Range : 40 Meters