Expanding Fillers

Cured foam can be cut, sanded, plastered or painted
Cured foam is heat resistant from -40°C to +100°C
Cured foam is water resistant and rot-proof
Good heat / sound insulation
Piston can also available which enables the can to be used at any angle to reach difficult areas

BONDS:
To most building materials except polyethylene, Teflon, silicone, oils and greases, mould release agents etc.

Size: 750 ml

Using new foam technology, No Waste Foam is the first Hand Held Foam that allows part used cans to be saved and used again and has a shelf life of 24 months, compared with 12 months for conventional foams.

Its unique safety valve will not clog or leak, guaranteed to work everytime.

Gun Grade Expanding Foam is a quick setting polyurethane based foam which expands greatly on application and yields up to 50 times original can contents.

Can be cut, sawn, plastered and sealed over after approximately one hour.

Fills irregular gaps, fixes framework, insulates and sound deadens.

Designed for regular and professional use in conjunction with Gun Foam Applicators.

Everbuild Foam Eater is a revolutionary paste designed for the safe removal of cured PU foam and adhesives from most substrates.

Foam Eater may be used both inside and outside and its paste like consistency makes it suitable for both vertical and horizontal applications.

Foam Eater is especially suitable for removal of foam residues from window and doorframes.

A quality gun with teflon coated needle and adaptor which keeps the gun clean and unequalled air tightness essential to ensure the gun does not let you down.

Dual Purpose Foam Cleaner is used to remove wet/uncured foam.

Attaches to Gun Foam Applicator for purging through; also includes spray nozzle for use without applicator to remove wet foam from outside of the gun and from most building substrates.

Everbuild Fill and Fix Expanding Foam are quick setting one part polyurethane foams in aerosol form. The Fill and Fix version is supplied with attachable nozzles and Gun Grade is supplied for use with our range of applicator guns. The foam expands on application to up to 50 times its original volume and expands on application by 150%. Once cured, the foam can be cut, sawn or plastered over after only on hour providing the working temperatures (can and surfaces) are between +5 to +25°C, ideally 20°C.

BENEFITS
- Quick setting  can be cut, sawn or plastered in 1 hour
- Economical in use  expands up to 50 times its original volume
- Fills irregular and broad gaps where most conventional fillers would fail
- Possesses insulating and sound deadening properties.

AREAS OF USE

Filling
- gaps around pipe entries through walls
- gaps around window frames, door frames
- electrical wire chasing prior to plastering
- deep joints prior to applying sealant or plaster
- irregular gaps in stone, brick, concrete or plaster

Fixing
- door frames
- timber structures
- window sills and thresholds
- Window frames

Insulating
- behind cladding to exterior walls
- behind sofit and barge boards
- in automotive applications

500ml

Everbuild Fill and Fix Expanding Foam are quick setting one part polyurethane foams in aerosol form. The Fill and Fix version is supplied with attachable nozzles and Gun Grade is supplied for use with our range of applicator guns. The foam expands on application to up to 50 times its original volume and expands on application by 150%. Once cured, the foam can be cut, sawn or plastered over after only on hour providing the working temperatures (can and surfaces) are between +5 to +25°C, ideally 20°C.

BENEFITS
- Quick setting  can be cut, sawn or plastered in 1 hour
- Economical in use  expands up to 50 times its original volume
- Fills irregular and broad gaps where most conventional fillers would fail
- Possesses insulating and sound deadening properties.

AREAS OF USE

Filling
- gaps around pipe entries through walls
- gaps around window frames, door frames
- electrical wire chasing prior to plastering
- deep joints prior to applying sealant or plaster
- irregular gaps in stone, brick, concrete or plaster

Fixing
- door frames
- timber structures
- window sills and thresholds
- Window frames

Insulating
- behind cladding to exterior walls
- behind sofit and barge boards
- in automotive applications

750ml

A professional quality gun designed for the
application of single component polyurethane
foam. A trigger and flow adjuster knob, enable the
user to control the foam flow to give a clean, even
bead and reducing waste. The gun is hermetically
sealed to prevent hardening of the
product when left in the gun.

Expanding Foam Polyfilla is ideal for filling and sealing awkward gaps, hollows and cavities. It shoots liquid foam deep into cavities, creating a long lasting seal, which insulates against heat, sound and moisture. Suitable for inside or out, it can be easily trimmed and sanded ready to be painted, filled or plastered. Contains a CFC - free propellant

TOOLS REQUIRED

Gloves, water spray, knife

Expanding Foam Polyfilla is ideal for filling and sealing awkward gaps, hollows and cavities. It shoots liquid foam deep into cavities, creating a long lasting seal, which insulates against heat, sound and moisture. Suitable for inside or out, it can be easily trimmed and sanded ready to be painted, filled or plastered. Contains a CFC - free propellant

TOOLS REQUIRED

Gloves, water spray, knife