Online Catalogue | Power Tool Accessories | Router Bits & Accessories | Router Bits - Craft Range | Craft Range Two Flute Straight Router Bits

View Cart

Checkout

Items:
Value:

Product Sections:

Power Tool Accessories

Drill Bits and Holesaws

Hardware Products & Consumables

Home & Leisure

Workwear, Tool Storage & Safety

Decorating Products

Power Tools

Main Pages:

Information and Featured Products

Help Sheets

WEEE

Best Sellers

Kreg RAC Right Angle Clamp (Ref: 200803)
Leigh 173 3/8" HSS Spiral Upcutter (Ref: 475871)
Leigh 18" Vacuum & Router Support for Super 18 Dovetail Jig - VRS18 (Ref: 701485)
Leigh 709 Guidebush - 3/8" (Ref: 476876)
Leigh 128-8 ½" 18 Deg. TCT Dovetail Cutter 8mm Shank 2 1/8" Long (Ref: 476385)
Kreg NZ03-B Mag Drawer Slide - Full Extension Brackets (Ref: 701289)

Craft Range Two Flute Straight Router Bits

Online Catalogue | Power Tool Accessories | Router Bits & Accessories | Router Bits - Craft Range | Craft Range Two Flute Straight Router Bits

C001 x 1/4 Tungsten Carbide Two Flute 3.2mm

Ref: TREC00114TC

Price: £13.22 (Including VAT at 20%)

Quantity:

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow mortising.

They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.

All cutters have a bottom cut feature.

When deep cuts are required, more than one pass should be taken.
Shank. 1/4in

Diameter - 1/8in 3.2mm
Cutting Length - 3/8in 9.5mm
T.C.T.
2 Flutes.

C002 x 1/4 Tungsten Carbide Two Flute 4.0mm

Ref: TREC00214TC

Price: £12.61 (Including VAT at 20%)

Quantity:

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow mortising.

They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.

All cutters have a bottom cut feature.

When deep cuts are required, more than one pass should be taken.
Shank. 1/4in

D - Diameter - 5/32in 4.0mm
C - Cutting Length - 7/16in 11.1mm
T.C.T.
2 Flutes.

C005 x 1/4 Tungsten Carbide Two Flute 6.0mm

Ref: TREC00514TC

Price: £9.46 (Including VAT at 20%)

Quantity:

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow mortising.

They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.

All cutters have a bottom cut feature.

When deep cuts are required, more than one pass should be taken.
Shank. 1/4in

D - Diameter - 15/64in 6.0mm
C - Cutting Length - 5/8in 16mm
T.C.T.
2 Flutes.

C007 x 1/4 Tungsten Carbide Two Flute 6.3mm

Ref: TREC00714TC

Price: £8.82 (Including VAT at 20%)

Quantity:

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow mortising.

They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.

All cutters have a bottom cut feature.

When deep cuts are required, more than one pass should be taken.
Shank. 1/4in

D - Diameter - 1/4in 6.3mm
C - Cutting Length - 3/4in 19.1mm
T.C.T.
2 Flutes.

C008 x 1/4 Tungsten Carbide Two Flute 6.3mm

Ref: TREC00814TC

Price: £11.34 (Including VAT at 20%)

Quantity:

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow mortising.

They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.

All cutters have a bottom cut feature.

When deep cuts are required, more than one pass should be taken.
Shank. 1/4in

D - Diameter - 3/8in 9.5mm
C - Cutting Length - 3/4in 19.1mm
T.C.T.
2 Flutes.

C013 x 1/4 Tungsten Carbide Two Flute 9.5mm

Ref: TREC01314TC

Price: £11.34 (Including VAT at 20%)

Quantity:

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such as engraving, grooving, rebating and shallow mortising.

They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.

All cutters have a bottom cut feature.

When deep cuts are required, more than one pass should be taken.
Shank. 1/4in

D - Diameter - 3/8 in 9.5mm
C - Cutting Length - 1 1/4in 31.8mm
T.C.T.
2 Flutes.

C015 x 1/4 Tungsten Carbide Two Flute 9.5mm

Ref: TREC01514TC

Price: £12.61 (Including VAT at 20%)

Quantity:

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow mortising.

They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.

All cutters have a bottom cut feature.

When deep cuts are required, more than one pass should be taken.
Shank. 1/4in

D - Diameter - 25/64 in 10.0mm
C - Cutting Length - 3/4in 19.1mm
T.C.T.
2 Flutes.

C016 x 1/4 Tungsten Carbide Two Flute 10.0mm

Ref: TREC01614TC

Price: £12.61 (Including VAT at 20%)

Quantity:

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.

They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.

All cutters have a bottom cut feature.

When deep cuts are required, more than one pass should be taken.
Shank. 1/4in

D - Diameter - 10mm
C - Cutting Length - 19.1mm
T.C.T.

C022 x 1/4 Tungsten Carbide Two Flute 12-7mm

Ref: TREC02214TC

Price: £15.12 (Including VAT at 20%)

Quantity:

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow mortising.

They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.

All cutters have a bottom cut feature.

When deep cuts are required, more than one pass should be taken.
Shank. 1/4in

D - Diameter - 1/2in 12.7mm
C - Cutting Length - 1 1/4 31.8mm
T.C.T.
2 Flutes.

SET/SS9TC 1/4 Tungsten Carbide Starter Cutter Set 15pc

Ref: TRESETSS9TC

Price: £54.97 (Including VAT at 20%)

Quantity:

Starter cutters set containing a range of 15 popular cutters supplied in a plastic carry case.

Including: Single flute, two flute, dovetail, guided round and over guided chamfer, rebater, trimmer, cove and roman ogee, v groove and core box cutters.

Size: 1/4in shank.

Type: tungsten carbide tipped.

C153d x 1/2 Tungsten Carbide Two Flute 12.7mm

Ref: TREC153D12TC

Price: £23.95 (Including VAT at 20%)

Quantity:

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

D1 1/2 inch
D1 12.7 mm
Cut length 2 inches
Cut length 50 mm
Shank Diameter 1/2 inch

C153 x 1/2 Tungsten Carbide Two Flute 12.7mm

Ref: TREC15312TC

Price: £15.12 (Including VAT at 20%)

Quantity:

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

D1 1/2 inch
D1 12.7 mm
Cut length 2 inches
Cut length 50 mm
Shank Diameter 1/2 inch

C014 x 1/4 Tungsten Carbide Two Flute 9.5mm

Ref: TREC01414TC

Price: £11.98 (Including VAT at 20%)

Quantity:

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

D1 3/8 inch
D1 9.5 mm
Cut length 1 inch
Cut length 25.4 mm
Shank Diameter 1/4 inch

Online Catalogue | Power Tool Accessories | Router Bits & Accessories | Router Bits - Craft Range | Craft Range Two Flute Straight Router Bits